The important thing is to measure the weight online under the given industrial conditions and with a high degree of repeatability. In addition to ensuring product quality, by setting an appropriate target weight with tightly selected tolerances, considerable savings in material and energy consumption can be achieved along with an increase in productivity and the reliability of the process. Width Measurement:
The Wilot WMR is a reliable instrument for non-contact, continuous measurement of product width, especially at the delivery end of a stenter. A Wilot WMR helps finishers to maintain the quality specifications of their customers and minimise the costs incurred by rejects and impaired quality standards.
Mahlo GmbH + Co. KG one of the world's leading manufacturers of monitoring, control and automation systems for the textile and allied finishing #
IR-LEDs in reflex mode determine product width. The operator can adjust the sensitivity of the sensors at the control panel supplied, and specify maximum and minimum permissible product width for alarm functions. Since the sensor module is arranged on one side only of the online material, it is most flexible in terms of choice of location. Its applications are in stenter frames, levelling stenters, etc.
In web inspection Mahlo has these technologies:
Webscan WIS:
The Webscan WIS is a modular system designed for inspecting material, detecting and logging faults and irregularities across the full width of the product. The Webscan WIS can be used in practically every industrial sector where products are manufactured or finished (e.g. coated) in web form. Since its component parts are constructed and assembled in modular form, it can be tailored to meet the specific requirements of individual customers.
Aided by the very latest in high-tech cameras, a Webscan WIS inspection system checks the online product for faults. The system is provided as per requirements with several line scan cameras to enable it to evaluate extra-wide material as well. In doing so, it discriminates between various types of defects. The standard system is capable of detecting faults at linespeeds of up to 120 m / min (or higher if required).
SampleCut FSC-12:
To monitor the progress of certain processes there is no alternative but to take frequent samples at the machine itself. However, this can only be done whilst the material is at a standstill or running slowly, and often leads to all manner of sometimes absurd measures to enable the process to run continuously (non-stop batching, etc.).
With the Samplecut FSC, Mahlo offers a solution to the problem. The tried and tested Samplecut FSC appliance cuts samples from the high-speed product. The Samplecut FSC can be installed for example at a convenient place at the delivery end of a stenter. The pneumatics work at high pressure and press the circular blade through the material and against a counter block, all in a fraction of a second. The sample is punched out and fed via the sampling device to the operator end. The operator need only press a button to release the sample via the control panel.
Patcontrol PCS-12 Airbag:
Modern production engineering demands high standards, extreme precision and reliability from suppliers to the car industry, particularly those from the safety-related sector. Constant supervision of components is an indispensable prerequisite for perfect products. This applies in a particular way to the most diverse types of airbag used for safeguarding the driver and passengers seated in motor vehicles.
Fibre2fashion News Desk - India
marketing@alchempro.com
